Communication Problems from Sol-Ark Inverter to BMS

Modified on Fri, 20 Oct, 2023 at 8:14 AM

If there is a triangle with an exclamation point on the inverter on top of the battery, this is most likely a communication error due to the fact that the cable isn't wired properly.


Cable pin setup is usually the reason you are having communication issues between your Homegrid BMS and Sol-Ark Inverter.  See the diagrams below to make sure your cable is setup the correct way.


Please confirm the Inverter communication cable is plugged into the CAN Port of the BMS and the Battery CAN BUS on the inverter.



Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article